3 Causes of Brakes Not Working and How to Overcome Them

One of the most common causes of traffic accidents, apart from driver fatigue, is brake failure. If not recognized and cared for properly, these components will endanger the driver.

Brakes are a component that must be in good condition because they are vital for the safety of passengers and other drivers. Brake maintenance must be carried out regularly to avoid the risk of brake failure which can be very dangerous.

It is important to know the 3 causes of brake failure and how to overcome them to be safe while driving.

Vehicle brakes have a limited life. Over time, the brakes will wear out and stop working.

There are two types of brakes, drum, and disc. In these two brake systems, pressure from the brake lines pushes the discs or drums onto the wheels to slow down the vehicle.

Drum brakes have more components and tend to be complex even though they are less expensive.

Causes of Blong Brakes

1. Broken Piston or Canvas

The cause of the second thing is damaged or worn out is usually due to age. To keep it running well, check these components regularly every time the vehicle travels a distance of 10,000 km.

2. Clogged Brake Oil Hose

The next cause of brake failure is a clogged brake fluid hose. The condition of the brake fluid and small oil hose must always be checked because cars generally use a braking system with fluid pressure from the brake fluid in the braking mechanism.

3. Piston Seals Worn

The last cause is the quality of the brake fluid which is already bad because it has expired or has been contaminated with many things due to opening the oil tube cap too often.

How to Overcome Brakes Not Working

Car drivers can take the following ways to avoid possible fatal risks when the vehicle experiences a brake failure.

Stay calm

The most important thing when the brakes don’t work is to stay calm. Next, you can try to apply the brakes as fast as possible to create strong friction to make the car stop.

Do not immediately turn off the machine

It is recommended not to turn off the engine immediately because it can make it difficult for the driver to control the steering wheel. When the engine is off, the power steering pump will also die which makes the steering wheel heavier and the brakes do not function normally.

brake pump

Steps that can be taken when the brakes fail are to keep pumping the brake pedal. This is done so that the pressure returns to the way it was before.

However, if when you pump the brakes feel heavy or hard, there may be a problem elsewhere, and try the next method.

Turn on the hazard lights and sound the horn

Turning on the hazard lights and honking the horn can be done to signal to other drivers that there is a problem with the car being driven.

Pull the handbrake

The hand brake or hand brake can be relied on to slow down the vehicle when the brake pedal is stuck or not working. Pull the handbrake slowly and carefully, not suddenly.

If you feel the brakes bite, hold it in that position so you don’t lose control until the vehicle really slows down or even stops.

Hit soft objects

If the brakes don’t work at all, you’ll need to find a way to prevent a collision, either with another vehicle or with nearby buildings, citing OhioTiger.

Alternatively, you can crash the vehicle into something soft like a mound or pile of sand to stop the vehicle with minimal risk.